We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Single Channel Infrared 2.3 - 2.8 Mhz - 1 Channel Car Amplifiers
To power up your sub-woofers, install a mono amplifier. Among many features of a mono amplifier are low frequency reproduction, built in bass boost and low pass filters. A class D mono amplifier brings out less heat, are more efficient and draws less current.
One channel car amplifier provide users with a single audio input/output selector to power one speaker. This device is great if you only need to power a large woofer or subwoofer.
Shop By
-
Autotek MM1525.1D 1,500 Watt Class D Mono Amplifier with wired bass boost control$89.99- 1,500 Watt RMS 1-Channel Class D Car Amplifier
- Class D Design Offers Efficiency and High-Quality Sound
- Continuous Power Output (1 Ω, ≤ 1% THD+N): 150 W x 1
- Continuous Power Output (2 Ω, ≤ 1% THD+N): 750 W x 1
- Continuous Power Output (4 Ω, ≤ 1% THD+N): 375 W x 1
-
Soundstream Picasso Nano PN1.650D Class D Monoblock Amplifier - 650 Watts$124.99- Picasso Nano 650 watts monoblock amplifier
- MOSFET PWM Power Supply
- Small and compact chassis of just 4.75”
- Remote gain control included
- High level inputs
-
Blaupunkt AMP3000D 3000 Watt Class D Monoblock Amplifier$125.99- 3000 Watt Class D Monoblock Amplifier
- 4-ohm / 2-ohm / 1 ohm stable
- 800W x 1 @ 1 Ω
- 630W x 1 @ 2 Ω
- 380W x 1 @ 4 Ω
- Includes Bass Control Knob
-
Power Acoustik EG1-2500D 1 Channel Class D Amplifier - 2500 Watts$129.99- Power Acoustik EG1-2500D Class D Monoblock Amplifier
- Designed as a dedicated subwoofer amplifier
- 1 Ohm stable for for optimal subwoofer wiring
- 1250 Watts RMS x 1 channels @1-Ohms
- 800 Watts RMS x 1 channels @2-Ohms
- RCA level inputs
-
Precision Power SPL15001 SPL Audio Monoblock Amplifier - 750W RMS$129.99- Class-D Monoblock Amplifier
- Designed as a dedicated full range audio amplifier
- Stable 1 ohm, 2 ohm and 4 ohm loads
- 750W RMS @ 1 ohm
- 500W RMS @ 2 ohm
- 350W RMS @ 4 ohm
-
Hifonics BRX1116.1D Brutus Series 1100 Watts Class D Mono-Block Amplifier$152.99- BRX1116.1D Brutus BRX Series Mono-Block Class-D Amplifier with 1100 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass boosts from 0 to +10dB at 45 Hz
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 4 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 400 watts x 1 channel
-
Soundstream PN1.1000D Picasso Nano 1000 Watt 1 Channel Class D Amplifier$167.99- 1000 Watt 1 Channel Class D Amplifier
- 4-ohm / 2-ohm / 1-ohm stable
- Continuous Power Output (4 Ω): 350 Watts RMS x 1
- Continuous Power Output (2 Ω): 600 Watts RMS x 1
- Continuous Power Output (1 Ω): 1000 Watts RMS x 1
- Includes Bass Control Knob
-
Rockford Fosgate R500X1D 500 Watt Single Channel Class D Car Amplifier$171.99Out of stock- 500 Watt Prime Series Monoblock Class D Car Amplifier
- 500 watts RMS x 1 Channels at 2 ohms
- 300 watts RMS x 1 Channels at 4 ohms
- High level input capable with an Muted Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink
-
Pioneer GM-D8701 1,600 Watt Class FD Mono Amplifier with wired bass boost control$171.99Out of stock- GM-D Series 1,600 Watt RMS 1-Channel Class FD Car Amplifier
- Class FD Design Offers Efficiency and High-Quality Sound
- Continuous Power Output (1 Ω, ≤ 1% THD+N): 800 W x 1
- Continuous Power Output (2 Ω, ≤ 1% THD+N): 500 W x 1
- Continuous Power Output (4 Ω, ≤ 1% THD+N): 300 W x 1
-
Hifonics BG-1300.1D BRUTUS Gamma Monoblock Amplifier - 1300 Watts$181.99- Class-D Monoblock Amplifier
- Designed as a dedicated full range audio amplifier
- Stable in 1 ohm, 2 ohm and 4 ohm loads
- 4 ohms: 325 watts x 1 channel
- 2 ohms: 650 watts x 1 channel
- 1 ohms: 1300 watts x 1 channel
-
Sony XM-GS100 600 Watt Class D 1-Channel Amplifier$199.99- 700 Watts Max Power
- 1-Channel Amplifier
- Super compact design
- Pulse Width Modulated MOSFET Power supply
- Class D Design Offers Efficiency and High-Quality Sound
- Speaker level inputs with auto turn on
-
Kenwood KAC-D5101 1000 Watt Class D Monoblock Amplifier$199.99Out of stock- 1000 Watt Class D Monoblock Amplifier
- 4-ohm / 2-ohm stable
- 500W x 1 @ 2 Ω
- 300W x 1 @ 4 Ω
- Signal sensing turn on
-
Pioneer GM-DX871 1,600 Watt Class FD Mono Amplifier with wired bass boost controlSpecial Price $199.99 Regular Price $249.99- GM-DX Series 1,600 Watt RMS 1-Channel Class FD Car Amplifier
- Class FD Design Offers Efficiency and High-Quality Sound
- Continuous Power Output (1 Ω, ≤ 1% THD+N): 800 W x 1
- Continuous Power Output (2 Ω, ≤ 1% THD+N): 500 W x 1
- Continuous Power Output (4 Ω, ≤ 1% THD+N): 300 W x 1
-
Polk Audio PA880 Class AB Monoblock Amplifier - 800 watts$203.99- Class AB 800 Watts Amplifier
- Monoblock audio amplifier
- Stable and High-Speed MOSFET power supply
- Nickel plated terminals for maximum signal transfer
- Corrosion-Free, Environmental Friendly Stainless Steel Construction
-
Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier$211.99- Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier
- 1000 watts RMS x 1 Channel (1 ohm)
- 600 watts RMS x 1 Channel (2 ohms)
- 400 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-10001D
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog